MONTI ANTONIO MOD. 859T

Special calender for pieces or continuous fabrics, used for:
• Transfer printing
• Direct inks reactivation
• Thermosetting - heatsetting

Versatile and polyvalent calender, developed for transfer printing of all the follows work conditions, according to
required options:
• Printing paper in roll and material to be printed in roll
• Printing paper in roll and material to be printed in pieces
• Printing paper in sheets and material to be printed in pieces

1. CHARACTERISTICS OF PRINTING CYLINDER:
1.1. Diameter : 500 mm (19,69“).
1.2. Width : 1.800 mm (70,86“).
1.3. Working Width: 1.600 mm (62,99“).

2. HEATING SYSTEM AND TEMPERATURE CONTROL:
2.1. The cylinder is heated by one resistor (heating element) in a vacuum sealed oil bath, in complete absence
of air and pressure. MONTI ANTONIO S.p.a system.
2.2. The temperature of the cylinder is set by a touch screen and regulated directly through an electronic sheet.
The temperature control is equipped with temperature alarm system and a limitation system of maximum
temperature (230 °C).

3. TENSION CONTROLS:
3.1. Tension control for printing material in roll:
• Entry: disk brake with pneumatic adjustment + fabric manual brake
• Exit: winding per contact on rubbed roll
3.2. Tension control for printing paper in roll:
• Entry: disk brake with pneumatic adjustment
• Exit: winding on aluminum shaft dragged by the main engine and equipped of pneumatic clutch
3.3. Tension control for protection paper:
• Entry: disk brake with pneumatic adjustment
• Exit: winding on aluminum shaft dragged by the main engine and equipped of pneumatic clutch

4. OTHER DEVICES INTO MACHINE:
4.1. Short front working table, 1200 mm
4.2. NOMEX felt with tension adjustment system and automatic felt-centring device
4.3. Incorporated system of felt protection in case of black out and/or compressed air lack
4.4. Machine general management, including temperature controls, controlled by a programmable PLC for the
production data memorization
4.5. Front touch-screen keyboard for several access to many work programs.

5. TECHNICAL DATA:
5.1. Installed power: 26 kw
5.2. Average electric consumption: 17 kw/h
5.3. Compressed air pressure: 6-8 bar
5.4. Mechanic speed: 0.5 – 7,5 m/min

5.5. Overall dimensions (with front table): width 3.200 mm (126“). length 3.250 mm (128“). height 1.700 mm (67“).
5.6. Net weight (with standard front table): 2.900 Kg
5.7. Machine produced according to CE rules in Italy

All data and technical features are purely indicative and subjected to changes without prior notice