LANCER EXCALIBUR 700PF METALLIC COLOURS

TECHNICAL INFORMATION

Gel Temperature: Ink will surface gel at 240° F (116° C).
Curing: Excalibur 700PF Metallic Colours will fully cure when the entire ink film reaches 320° F (160° C.) and held at this temperature for at least 30 seconds.  Because of the reflective nature of the metallic flakes it may require raising the temperature, a long dwell time inside the dryer or a combination of both to achieve full cure.
Heat Transfers:  Excalibur 700PF Metallic Colours may be used in the production of cold peel transfers when used in conjunction with with Glitter-Strip Transfer Paper or any other paper suitable for printing metallic or glitter inks.
Mesh: For direct or transfer printing a 40-110/inch (16T-43Tcm) provides excellent results depending upon the detail within the design.
Modification: Because plastisol inks are thixotropic and can body up during storage always stir ink thoroughly prior to print or adding reducers. If necessary 501PF Curable Reducer may be added increase printability of ink and to help clean from the screen. CAUTION: Adding too much 501PF Curable Reducer will reduce opacity and bleed-resistance.
Squeegee: 70 durometer or 70/90/70 triple durometer blades are recommended.
Printing Techniques: A print/flash/print technique may be necessary to produced desired results on dark garments.
Clean-up: Use Ink Residue Remover.

CAUTION

Always test finished prints for color accuracy, crocking, curing, adhesion and desired look prior to beginning full production runs. Lancer Group International cannot guarantee the results or back claims that this mixed ink will test phthalate-free if any additive other than those manufactured by Lancer Group International is used to produce this ink. Test results by a third-party laboratory verifying all components used to produce this ink are phthalate-free and lead-free are available upon request.