LANCER EXCALIBUR 595PF HIGH OPACITY WHITE

TECHNICAL INFORMATION

Gel Temperature: Ink will surface gel at 240° F (116° C).
Curing: Ink will fully heat cure when the entire ink film reaches 320°F (160°C) for at least 15 seconds.
Heat Transfers: 595PF may be used in printing cold peel transfers.
Mesh: For direct printing an 320/inch (32T-122Tcm) may be used. For printing heat transfers an 86-125/inch (32T50T cm) provides excellent results.
Stencil: Any stencil compatible with plastisol inks may be used.
Modification: Because plastisol inks are thixotropic and can body up during storage always stir ink thoroughly prior to print or adding reducers. If necessary 501PF Curable Reducer may be added increase printability of ink and to help clean from the screen. CAUTION: Adding too much 501PF Curable Reducer will reduce opacity and bleed-resistance.
Squeegee: 70 durometer or 70/90/70 triple durometer blades are recommended.
Printing Techniques: A print/flash/print technique may be necessary to produced desired results on dark garments.
Clean-up: Use Ink Residue Remover.

CAUTION

Always test finished prints for color accuracy, crocking, curing, adhesion and desired look prior to beginning full production runs. Lancer Group International cannot guarantee the results or back claims that this mixed ink will test phthalate-free if any additive other than those manufactured by Lancer Group International is used to produce this ink. Test results by a third-party laboratory verifying all components used to produce this ink are phthalate-free and lead-free are available upon request.